Motorization of blinds: optimal comfort

Control your hand blinds with a switch. There is no need to change everything with the PergolasVIP kit for the upgrade wire. Everything you need is already there!
After assembling the axle, simply open the drawer and replace the old pipe with a new one, and then close the drawer. It's so easy!

To find out if your roller shutter is compatible with a wired 10 Nm motorization kit, make sure that:

• The previous axis has a diameter of 40 mm and a length of 450 to 1500 mm

• A suitable power has been selected (see the calculation formula below)

*Estimated weight of lamellas: PVC 4 kg/m2, aluminum 4.5 kg/m2, wood 11 kg/m2.

If your roller shutter weighs up to 20 kg, 10 Nm will do.

Contents of a set of motorized wire axis ø40 mm

• 1 - Octagonal axis ø40 mm - Length 1500 mm, adjustable (x1)

• 2 - Pipe tip ø40 mm with ball bearing (x1)

• 3 - Rotary plate with locking mechanism ø12 mm 75 x 75 mm (x1)

• 4 - Motor mount

• 5 - Fixing shutters in the form of T (x3)

• 6 - Wire motor ø35 mm 005282 -
  Pipe length 395 mm - 10 Nm (x1)

• 7 - Wheel and gear for octagonal axis ø40 mm

• 8 - Stylus for adjusting the end positions (x1)

• 9 - Self-tapping screws (x3)

• 10 - PergolasVIP inverter for outdoor or indoor installation (x1)