Modernization of roller shutters

Choosing this complete motorized shaft kit for Somfy radio RTS means choosing the easiest way to handle daily shutters. This complete set allows you to save money: there is no need to change the entire roller shutter. You just need to open the trunk and drop the previous axle before changing it.

The Somfy® radio-mechanized valves are controlled using the supplied remote control or any other Somfy® brand remote control. By purchasing this gate electric drive unit, you also get access to connected technologies, since the RTS Somfy drive can be controlled using the Tahoma unit and the Connexoon unit (sold separately).

Determine compatibility with your roller shutters

To find out if your roller shutters are compatible with the RTS motorized axle kit, make sure that:

• The previous axis has a diameter of 40 mm and a length from 620 to 1500 mm.
• The stored power is sufficient (see the calculation formula below)

* Estimated weight of the bar: PVC 4 kg/m2, aluminum 4.5 kg/m2, wood 11 kg/m2.

The composition of the set of motorized axles RTS Somfy® ø40 mm

1 - Octagonal axis ø40 mm - Length 1500 mmCan be cut to the desired size

2 - Electric motor Somfy ALTUS 40 RTS ø40 mm — length 550 mm — 9 Nm (x1)

3 - Situo Mobile RTS remote control

4 - Adaptation wheel and crown for the octagonal axis of 40 mm.

5 - Pipe end ø40 mm with ball bearing (x1)

6 - LS40/LT50 9500659 interface bracket

7 - Universal operator support 9910000

8 - T-shaped Apron clips (x3)

9 - Self-tapping screws (x3)

10 - Rotary plate with pin ø12 mm 75 x 75 mm (x1)

Technical characteristics of the radio engine

• Diameter: 40 mm
• Engine torque: 9 Nm
• Rotation speed: 14 rpm
• Voltage: 230 V
• Power: 100 watts
• Absorption: 0.5 A
• Duration: 4 min.
• Release temperature: 140°C
• Average sound level: 54 dBA
• Motor Weight: 1.18 kg
• Cell Capacity: 40 rounds
• Dust and moisture protection: IP44
• Approved by the NF