For the mechanization of manual roller blinds

Do you have a curtain with a sling, with a steering wheel or with a lock with a handle for extension? Step forward and place an order for this fully motorized axle, easy to install to replace the old mechanism, and all this at the most attractive price! More than just the price, we offer you access to high-quality curtain mechanization. The words of a French curtain expert manufacturer!
To take advantage of this, hurry up, the quantity of goods is limited!

Inspection of the curtain motor

The motor in this set of mechanization for roller blinds is a wired motor, that is, it is controlled from a conductor switch exclusively (supplied)-unlike a radio motor, which is controlled from a remote control.
This is a motor with a power of 10Nm, which corresponds to lifting a maximum of 20 kg - The estimated weights of the canvases: PVC 4 kg/m2, aluminum 4.5 kg/m2, wood 11 kg/m2.
The ends of the stroke are adjusted directly at the top of the motor, this stage is explained in the instructions provided.

The length of the motor requires that the trimmed axle be at least 500 mm. Therefore, your curtain must have a width of 500 to 1500 mm to be compatible.

The contents of your Curtain Mechanization kit upon admission

• 1 octahedral tubular shaft ø60mm, 1.5m long-rubber


• 1 wired motor with adaptations and fasteners-length 460mm-13 rpm, 230V/50Hz/IP44


• 1 built-in switch


• 1 pipe endpiece


• 3 flexible fasteners for attaching lamellas to the shaft


• 1 rotary plate


• 1 set of fasteners